How to Ski Tour 7 Bindings Tutorial DYNAFIT

YOUR LINK HERE:

http://youtube.com/watch?v=fen2ntyWTkM

Schorsch Nickaes, DYNAFIT Product Director and Mountain Guide shows how to start ski touring. He gives information about the do's and don'ts when stepping into a tech binding. • Schorsch´s advices in a nutshell: • // Tip 1: The binding has to be in step in mode, therefore push the lever down. • // Tip 2: Step in from behind with a 30 degree angle until the inserts hit the pins and press the toes down. • Don'ts: Do not twist your foot! • Do's: Step in from the back to the front until the inserts hit the pins! • // Tip 3: Lift the heel two times and block the binding by pulling the lever all the way up. • Don´ts: Do not only put the lever a little up but all the way otherwise the binding is not blocked for walking! • Do's: The binding is blocked, when you hear a click sound. • // Tip 4: How to get into the binding in deep terrain. • Don´ts: Do not step in the ski in deep powder and with the ski on uneven terrain • Dos: Create a little plateau with your ski, which is 90 degrees to the surface. First step in with the downward leg. • To find your perfect tech binding contact your local dealer: //https://www.dynafit.com/storelocator or visit our website: //https://www.dynafit.com/equipment/bin... • If you want to get even more informations about How to Skitour check out the long version of our video: // • How to Ski Tour | Long version | Tutorial ... • or read the blogstory on our website: //https://www.dynafit.com/how-to-skitour • Furthermore - did you know there is Lifetime Guarantee on our bindings? Learn more: https://www.dynafit.com/lifetime-guar... • • #speedup #skitouring

New on site